A MONOCHROMATIC, COLLIMATED BACK LIGHT, ACTS LIKE A CALIPER, PROVIDING PRECISE PARTICLE DEFINITION
INFORMATION REQUEST
A TELECENTRIC LENS PROVIDES THE SAME MAGNIFICATION LEVEL AT ALL DISTANCES
THE BLUE MONOCHROMATIC LIGHT PROVIDES PARTICLE DEFINITIONS BELOW 1 MICRON, WHICH CANNOT BE ACCOMPLISHED WITH THE STANDARD WHITE LIGHT USED BY OTHER DIGITAL IMAGERS
FULLY AUTOMATIC LABORATORY TEST SIEVE CALIBRATION
APPLICATION USINGDIGITAL IMAGING TECHNOLOGY
EASY OPERATION USING CALLISTO SOFTWARE
ASTM E 11, ASTM E 161 ISO 3310 1&2 DIN
2 MINUTE PASS FAIL SOP
COMPREHENSIVE SOFTWARE PACKAGE
COMPLETE REPORT GENERATION CAPABILITIES
REMOTE DIAGNOSTICS AND TECHNICAL SUPPORT
APERTURES 38 MICRONS TO 12 MM
UP TO 100% OF SURFACE MAY BE ANALYZED
SIEVECAL AUTOMATIC SIEVE CALIBRATOR
Although sieve calibration beads are highly usable
for calibrating laboratory test sieves,
when compared to digital imaging, the latter
provides a much higher degree of accuracy.
This actual microscopic photograph of .125 mm sieve soda lime glass calibration beads, shows a range of sizes, as well as a number of asperities.
POPULAR METHODS OF SIEVE VERIFICATION
SEND TO INDEPENDENT
SIEVE VERIFICATION FACILITY
SIEVE CALIBRATION STANDARDS
AVERAGE TIME PER 8 INCH SIEVE ONLY TWO MINUTES!
ASTM E-11 INSPECTION LEVEL
OCCHIO SIEVE CAL
Copyright 2012: QAQC Lab | Particle Measurement System | All rights reserved.
OCCHIO DIGITAL IMAGE ANALYZERS HAVE THE ABILITY TO DETECT AND QUANTIFY BOTH PARTICLE SIZE AND PARTICLE SHAPE, PAVING THE WAY FOR THE ADVANCED ANALYSIS OF PARTICLES IN BOTH LIQUID AND SOLID FORMS.
CORRELATIONS TO OTHER PARTICLE SIZE ANALYSIS METHODS, LIKE SIEVE ANALYSIS AND LASER DIFFRACTION, ARE SEAMLESSLY EMPLOYED. EVEN SHAPE PARAMETERS LIKE LENGTH, FLATNESS, AND ANGULARITY IN AGGREGATES, OR THE LENGTH OF STRINGY PARTICLES LIKE SHREDDED CHEESE, OR TOBACCO, ARE POSSIBLE.
ONCE A BASIC CORRELATION HAS BEEN ESTABLISHED, THE RESULTS ARE FINE TUNED WITH THE OCCHIO CORRELATION PROGRAM, ALLOWING FOR TURNKEY SOLUTIONS TO PARTICLE CHARACTERIZATION.
